When using drying equipment in daily life, it is necessary to enhance its maintenance in order to bring convenience to our use and improve its work efficiency. So, what are the maintenance methods for the three tube quartz sand dryer?

1. The bearing bears all the load of the machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, it is required that the injected lubricating oil be clean and well sealed.

2. Newly installed wheel rims are prone to looseness and should be checked regularly.

3. Pay attention to whether the various parts of the machine are working properly.

4. Pay attention to checking the degree of wear of easily worn parts and replace worn parts at any time.

5. The base plane of the movable device should be cleaned of dust and other substances to prevent the movable bearings from moving on the base frame when the machine encounters materials that cannot be broken, in order to avoid serious accidents.

6. When the oil temperature of the bearing rises, it should be stopped immediately to check the cause and troubleshoot it.

7. If there is an impact sound during the operation of the rotating gear, it should be stopped immediately for inspection and troubleshooting.

The daily maintenance of a three cylinder dryer is essential. Only by regularly maintaining and servicing it can manufacturers reduce the occurrence of equipment failures and extend its service life.