Blockage of a three cylinder dryer is a serious issue, and our operators need to be cautious and ensure that every step and operation is carried out according to the operating standards during production. The blockage of the three tube dryer is one of them. Every time we encounter blockage, it can be a headache. Therefore, in order to prevent a series of problems caused by blockage, we need to do something. If the problem of blockage is not taken seriously, it will cause the cow three drum dryer equipment to go from normal production to shutdown, seriously affecting production efficiency. Therefore, in order to avoid the problem of blockage, we need to do the following to ensure that our three drum dryer equipment can operate quickly and smoothly.

Three tube dryer is equipped with monitoring imaging equipment: the correct installation of the dryer can timely observe the drying status position, and then the drying status is transmitted to the central control room monitoring machine, so that the operator can grasp the drying status and discover it in a timely manner; Choosing the appropriate filter for a three tube dryer: the impurities in the feed solution of the filter, the selection of the filter mesh, and the diameter of the inlet channel and microporous filter mesh of the three tube dryer are usually 0.2 times the size of the cow manure dryer inlet channel or pore.

Three tube dryer quick opening structure: The three tube dryer has a momentary positioning card, which allows for easy assembly and disassembly of dryer parts without the need for any tools. It is easy to operate and saves a lot of time in dealing with malfunctions.

The technological transformation and upgrading of the three tube dryer equipment can improve the energy density of lignite, reduce moisture content, significantly reduce carbon dioxide emissions and fuel consumption, reduce losses in the supporting systems of power plants, and improve the power generation efficiency of power plants.

1. The three tube dryer system increases the inclination angle of the feeding end guide plate of the three tube dryer, allowing wet coal to quickly enter the enhanced drying stage;

2. The hopper of the three tube dryer lifting plate is welded with large chain link cleaning chains, which enhances the cleaning and heat conduction effects of the chains on dispersed materials, effectively preventing material adhesion inside and outside the lifting plate and on the inner wall of the drum.

3. Selection of dust collector for three tube dryer! Due to the fine particles and light density of fly ash, it is easy to be carried away by the airflow under negative pressure after drying, resulting in changes in the fluid medium, and the dust containing gas has a high moisture content. Therefore, the selection of the dust collector for the dryer should be based on the above process conditions.